Skip to content
Peculiar Materials

InsightsRare-earth magnet supply chain atlas › Magneti Ljubljana

Slovenia

Magneti Ljubljana

Permanent magnet manufacturer producing cast and sintered AlNiCo, sintered SmCo, and sintered and polymer-bonded NdFeB magnets, plus magnetic assemblies and (since 2023) 3D-printable bonded-magnet filament. Does not produce rare-earth alloy or metal itself; the company describes making its finished magnets and compounds from 'commercially available magnetic powders' and from bonded compounds either purchased from commercial suppliers or produced in-house from purchased powder. Ferrite is outside this profile's scope.

At a glance

Founded
1951 — Founded 1951 for AlNiCo magnet production; joined the state-owned ISKRA group in 1962, left ISKRA in 1989, privatized in 1992, and formally renamed 'Magneti Ljubljana, d.d.' in 1995.
Headquarters
Ljubljana, Slovenia (Stegne 37)
Ownership
Private, family-owned. Metallurgical engineer Albert Erman took over management in 1986 and acquired majority ownership (reported over 80%) during the 1992 privatization, financed by a personal mortgage. As of the 2022 EY family-business profile, the Erman family stated an intent to keep the company in family ownership, with wife Simona Erman as deputy director and son Grega Erman chairing the supervisory board since 1998. No evidence found of a later sale, bankruptcy, or restructuring changing this ownership as of 2026.
Revenue
EUR 18.5 million
Reported, FY2021.
Source

Capacity

This company manufactures magnets, so it has a capacity, but it does not publish one and no named third party has published a figure for it. An estimate of ours is exactly the kind of number this page exists not to print.

Narrative

Magneti Ljubljana is a Slovenian permanent-magnet manufacturer founded in 1951, with a continuous, single-purpose history in magnet production rather than a diversified industrial group. It spent 1962-1989 inside the state-owned ISKRA conglomerate before becoming independent and, in 1992, privatized into what became majority family ownership under Albert Erman. The company is one of a small number of remaining European producers spanning AlNiCo, SmCo, and NdFeB magnet technologies, and has publicized recycling/circular-economy work (direct reuse of waste SmCo and NdFeB magnets) alongside conventional sintered and bonded NdFeB production. It buys in alloy/magnetic powder feedstock rather than smelting or strip-casting its own rare-earth alloy, consistent with a finishing/magnet-maker rather than a vertically integrated alloy producer. It joined the Global Rare Earth Industry Association (REIA) in September 2023 and, as of that year, was participating as a magnet-materials supplier in the EU-funded HEFT electric-motor research project alongside GKN Automotive and other partners. No public capacity tonnage figures were found. The most recent public revenue and employee figures located (EUR 18.5 million, 244 employees) are for FY2021; no more recent statutory figures or evidence of insolvency, sale, or restructuring were found as of September 2026.

Where public sources disagree

Sources

  1. Company website - Company/history pageMagneti Ljubljana d.d. (2026-09)
  2. Company website - homepageMagneti Ljubljana d.d. (2026-09)
  3. Remag NdFeB product pageMagneti Ljubljana d.d. (2026-09)
  4. MAGNETI LJUBLJANA, d.d., Ljubljana - Family Business Slovenia 2022 profileEY Slovenia (2022)
  5. Magneti Ljubljana Joins the Global Rare Earth Industry AssociationGlobal Rare Earth Industry Association (REIA) (2023-09-19)
  6. GKN Automotive & Magneti Ljubljana... Key Partners on Euro R&D Project for Sustainability e-MotorMagnetics Magazine (2023-09-05)
  7. MAGNETI LJUBLJANA: Manufacture of permanent magnets using waste magnetsSlovenia Business (SPIRIT Slovenia / sloveniabusiness.eu) (2026-09)

How this page is sourced

Everything here comes from public sources — company filings, annual reports, exchange announcements, government releases and trade press. Every figure is linked to the document it came from and carries the date that document was published, because a capacity number without a date is not a fact, it is a rumor with a decimal point.

What is deliberately absent: material nonpublic information. I have spent more than two decades in this industry and a good deal of what I know about these companies I learned under NDA. Those obligations do not expire and they do not bend for a website. Nothing I have been told in confidence appears here in any form, and nothing on this page — or missing from it — should be read as a signal about what I know privately. I hold NDAs absolutely. It is the reason clients tell me things.

Judgment is the other thing left out on purpose. This page reports what has been published and who published it. Whether a target is credible, whether a ramp will hold, whether a capacity figure survives contact with the plant behind it — that is the work I do for clients, and it does not belong in a free reference page.

Where public sources disagree, I say so rather than picking a winner. Where a figure has not been published, the field says so rather than carrying an estimate. An empty field is information too.

Public filings tell you what a company has said. Whether it holds up is a different question, and the one I get hired to answer.

Get in touch